Name: Yeastar TA410
Brand: Yeastar
SKU: TA410

Key features

SIP interoperability

SIP (RFC3261) and IAX2 compatible, interoperable with Asterisk, Yeastar, Elastix, and most IP PBXs and softswitches on the market.

Web administration

Configuration and monitoring through an intuitive web interface, with no dedicated software installation required.

Call routing

Flexible call rules, automatic provisioning with Yeastar IP PBXs, and centralized remote management.

Gradual integration of existing equipment

Lets you keep existing analog/digital lines or equipment during a migration to VoIP.

Product details

FXO gateway that connects analog telephone lines or an existing PBX to a VoIP network. It is used in particular to retain a backup PSTN line or to run an older PBX alongside a new IP system during a gradual migration.

Specifications

Yeastar TA410 — Specifications
Specification	Value
Interfaces
FXO ports (RJ11)	4
RJ21 ports	Not available
LAN	1 x 10/100 Mbps
WAN	Not available
Management
Management protocol	RADIUS
Remote management	Not available
Power supply
Power supply	12V, 1A
Dimensions
Dimensions (L x W x H)	200 x 137 x 25 mm
Mounting	Desktop or wall-mounted
Protocols
Protocol	SIP (RFC3261), IAX2
Transport	UDP, TCP, TLS, SRTP
Codec	G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A, GSM, ADPCM
Voice capacity	ITU-T G.168 LEC, Dynamic Jitter Buffer, VAD, CNG, PLC
DTMF mode	RFC2833, SIP Info, In-band
Network
QoS	DiffServ, ToS, 802.1 P/Q VLAN tagging
Network	DHCP, DDNS, OpenVPN, PPPoE, Static Route, VLAN
Network protocol	FTP, TFTP, HTTP, HTTPS, SSH
Telephony
Signaling	FXS Loop Start, FXS Kewl Start
Caller ID	BELL202, ETSI (V23), NTT (V23-Japan), DTMF-based CID
Disconnection methods	Busy tone, polarity reversal
FXO connectivity	Programmable AC impedance, on-hook detection, off-hook detection, CID detection
Environment
Operating range	0°C à 40°C
Storage range	-20°C à 65°C
Humidity	10-90% non-condensing
Compatibility
Interoperability	Asterisk, Lync Server, FreePBX; Elastix certified